banner

  • pic
  • pic

Product Name YET863-WFR support rf remote control & wifi app

YET863-WFR support rf remote control & wifi app and it is design for roller shutter


Product Specification:

  • Input voltage:AC220
  • Contact current:<10A
  • Static current:<20mA
  • Dimension:109*73*40MM
Inquiry Now

Want create site? Find Free WordPress Themes and plugins.

Products overview

YET863-WFR support rf remote control & wifi app and it is design for roller shutter.

Features

1.Supporting Wi-Fi intranet or extranet connection: It can be used as a single product or networking [Multi-product] to be      controlled.

2.Supporting Smart Link network technology: Network configuration is simple and convenient

3.Support frequency 433.92mhz & learning code IC 1527

4.With high security, large memory, stable performance, low power consumption

5.Suitable for Single-phase ac asynchronous motor

Specification Parameter

Input voltage AC220
Contact current <10A
Wireless standard IEEE802.11b/g/n
Frequency 2.4G ~2.5G(2400M ~2483.5M)Hz/433/315
Encryption type WEP/TKIP/AES
Security mechanism WPA/WPA2
Sensitivity 802.11 b: -91 dbm (11 Mbps)

802.11 g: -75 dbm (54 Mbps)

433/315 :-110 dbm

Static current <20mA
Work environment Temperature:-40℃ ~ +80℃

Humidity:20% ~ 93%

Storage temperature  Temperature:-20℃ ~ +70℃Humidity:20% ~ 93%
Storage  <80pcs remote control
 Dimension  109*73*40MM

Product Description

1.Diagram

Laternal button description

To make the up direction of the motor and running time max.2miTo make the controller stop.

To make the motor down and running time max.2min

To switch the motor direction.

Remote control function

Remote control pairing

Press the LEARN button on controller till GREEN LED light up, controller into pairing mode then press any button on remote control, if LED flashes quickly 5 times and off, which means pairing ok. Controller will quit the pairing mode of not more remote control pairing within 15s.

Press and hold button A(up) & B(down) of paired remote control over 3s till GREEN led on controller light up, controller into pairing mode then press any button of remote control within 15s, LED flashes 5 times quickly means pairing succeed.

Controller Memory clearance

Press and hold LEARN button over 8s till GREEN led flashes 5 times quickly indicates remote control memory cleared.

UP/STOP/DOWN button description

Press button A of paired remote control, motor goes up and GREEN Led of controller flashes per 0.5S, motors runs max.2min.

Press button B of paired remote control, motor goes down and GREEN Led of controller flashes per 0.5S, motors runs max.2min.

Press button C of paired remote control, controller will stop working, GREEN led goes off.

Lock/Unlock function

Press button D(Lock) of paired remote control, GREEN led of controller flashes 5 times quickly, controller locked, then no reaction if any button on remote control or controller pressed.

Press button C(unlock) of paired remote control, GREEN Led of controller flashes 5 times quickly indicates controller unlocked.

Mobile phone control

APP download and installation

Android System

  • Chinese user:User can search keyword Yaoertai or Safemate through 360 mobile phone Assistance, then download the latest version “safemate.apk” and install the App following the instructions, or user can also download by scanning the following QR code.
  • Foreign user:User can search keywords Yaoertai or Safemate through Google Play, then download the latest version Safemate and install the App following the instructions. or user can also download by scanning the following QR code.

IOS system:Users can search keywords Yaoertai or Safemate through App Store, then download the latest version Safemate and install the App following the instructions,or user can also download by scanning the following QR code.

                         Android                                                IOS

         

APP User registration and login

Registration

Click the registration button on the login page and enter the registration page

     

Please click on the national/regional page to select your country or region.Go back to registration page, enter your right phone number, and click send verification code;Enter the verification code received by your phone;Before clicking on the next step, you need to read the product disclaimer and check so that agree to disclaimer.After verification of the verification code, click next to enter the user information configuration page

     

In the user information configuration page, write in your email address, login password, and fill in the login password again;After confirming all the information, please click the finishing button, and the system will prompt you to register successfully.Click ok, and the system returns to the login page. At this time, you can log into the software system using your account and password.

     

Account login

You must be choose your account to complete the login before you can manage and control your divice;The login mode is divided into two modes: mobile phone and mailbox, enter the correct account and password, click login, successfully login and enter the system home page.

APP User Manual

Used the APP and enter the personal center page;Click the user manual and enter the user’s manual page, where you can select what you want to know.

    

Account management:Will introduce you to “new account registration, account login, password management, mailbox configuration” etc;

Device management:You will be introduced to “adding new device, device classification, device list information” etc.

Location management: introduced to “add new location, edit location, change of device location, or delete”

Device control:introduce you to the application of “Device details control”

3.4Network Access

When your software is installed, you need to add a controller. The detailed description could be found in the APP user manual, or you can operate as following steps:

Click ” Add equipment” ->”enter WIFI password and confirm” (Please press the WIFI access button of the controller three times quickly until the indicator light flash, ->Finish:

     

    

The main control page of the product

When you successfully add the new device, pls click on the new device added, in which will enter the following main control page of the product.At this time, you can enjoy the fun and convenience intelligent.

     

Frequently Asked Questions

Question 1: Why does LED keep flashing slowly after failing to add device?

Flashing slowly means the device is connecting WIFI router, if it connects over 60 seconds, it’s failed. Under this situation, you may have entered wrong WIFI password or data error during transmission. So users have to check the network of your phone or WIFI router, make sure wifi router haven’t set connecting restriction, then try to reconfigure it again.

Question 2: Why does the device can’t be controlled suddenly?

  1.  Please check whether Wi-Fi password is changed, then check the state of LED. If it flashes slowly, it means the device is disconnected with WIFI router. Just reconfigure it;
  2. The device’s IP address assigned by router changes due to network, and results in the actual IP address inconsistent with the IP address saved by APP. With this situation, just exit then reset the APP to re-obtain device information
Did you find apk for android? You can find new Free Android Games and apps.

write us

Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.




May you like

YET2018All Rights ReseverdTechnical Support:Baiila