YET847 Tubular Motor Receiver
■ Be dedicated to 59mm tubular mote, both built in and external available
■ can be switched by single button mode and 4 buttons mode
■ Super-heterodyne receiver module , high sensitivity, strong ability with anti-interference
■ Model: YET847
■ working voltage: 220VAC
■ Working temperature: -40 ℃ ~ 85 ℃
■ Receiving frequency: 315/330/360 / 433Mhz optional
■ Memory : 40 (learning code )
■ Transmitter chip: 1527
■ Size:100mm*80mm*27.5mm (PC)
U：external receiver upstream output
D：external receiver down steam output
The external receiver must share the same neutral wire with the internal receiver!
Please do the safe handling of the U/D of the internal receiver to avoid the
high voltage danger when there is not connect with external receiver
Press the A & B button of the new remote control simultaneous and then
power up the receiver, 5s later the buzzer will buzz which indicates the receiver is
into learn mode.
If the remote control have been programmed, when the receiver is power up
and into normal working mode, press A & B button simultaneous for 5s, thebuzzer buzz indicates the receiver is into learn mode.
When receiver is in learning mode, Press the button A of the remote control you want to program,the receiver will buzz 3 times shortly which indicates programming is successful. If no more remote control programmed within 10s, receiver will quit the learn mode automatically.
If the receiver works conversely as expected, press button A & B simultaneousexceed 5s,receiver will buzz “BI BI” and then press button B, receiver will buzz “BI BI”3times shortly, then the uplink and downlink have been switched successfully.
When receiver is power up and into working mode, press the C &D button of
the programmed remote exceed 5s, the buzzer on the receiver will buzz 3 timesshortly which indicates the memory of the receiver was cleared.
To switch the 1 button mode and 4 button mode, press the D button of the programmed remote control exceed 8s, the receiver will switching between 1 button mode and 4 button mode, buzzer buzz 1 times indicates 1 button mode and buzz 2 times indicates 4 button mode.
1 button mode：only the programmed button works in order below and circulate : up> stop> down> stop
4 button mode：
A button up/ down
B button up/ down
C button stop
D button press button D longer than 8s to switch mode
Caution: Button sign might change, such as 1234 button, it is equal to the ABCD button as mentioned above.
Yaoertai Technology is professional designer and qualified manufacturer（factory） of the automatic door control systems with 13 years experience .
-Programmable wireless remote,
-tubular motor control panel,
-motor group controller,
-sliding door control board,
-garage door control board,
-rolling shutter controller board and other accessories.
Can you make customized products and customized packing?
Yes. We made a lot of customized products for our customer before. We can print your logo on our product and also make colorful box for you.
Do you have a guarantee of your product quality?( Do your products carry warranty?)
We have a guarantee of one year.
Does your transmitter waterproof?
Yes, we have waterproof models, such as YET2126/ YET2133/ YET2132/ YET2128/ YET2117/ YET2129.
How to learn a transmitter ?
After receiver enters the learning status, press the same button twice on transmitter, the indicate LED will tell the learning process is finished.
How many transmitters max can be learned into the rolling code receiver?
Different model ,different quantity. YET402PC can learn 30pcs leanring code transmitters, 6pcs rolling code max, YET402PC-V2.0 can learn 400pcs transmitters max.
Why your products are more expensive than other suppliers’ products?
Our cost is depended on our brilliant surface, high quality raw materials, high standard of safety and technology.
Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.Maecenas malesuada elit lectus felis, malesuada ultricies. Curabitur et ligula. Ut molesie a, ultricies porta urna.